Foil Doors:
For product cleaning only use a 5% soap, 95% water (liquid soap) solution, wiping with a damp (not wet) cloth, finally drying with a soft clean cloth. Dust with a soft cloth only.

Do not use wax-furniture polish, abrasive or aggressive cleaners, bleach or other hypochlorate (chlorine) based cleaners, multi-purpose cleaners, dilutes, acetone, alcohol, solvent or similar products on the door, as this will damage the surface.

Cooking splashes should be wiped up immediately using a damp cloth.

Stainless Steel Doors:
For product cleaning only use a 5% soap, 95% water (liquid soap) solution, wiping with a damp (not wet) cloth, finally drying with a soft clean cloth, or alternatively clean the surface with a E-cloth. Dust with a soft cloth only.

Do not use wax-furniture polish, abrasive or aggressive cleaners, bleach or other hypochlorate (chlorine) based cleaners, multi-purpose cleaners, dilutes, acetone, alcohol, solvent or similar products on the door, as this will damage the surface.

Cooking splashes should be wiped up immediately using a damp cloth.

A light coat of baby oil can be used to enchance the appearance of the door if required.

Timber and Veneer Doors :
For product cleaning only use a 5% soap, 95% water (liquid soap) solution, wiping with a damp (not wet) cloth, finally drying with a soft clean cloth. Dust with a soft cloth only.

Do not use wax-furniture polish, abrasive or aggressive cleaners, bleach or other hypochlorate (chlorine) based cleaners, multi-purpose cleaners, dilutes, acetone, alcohol, solvent or similar products on the door, as this will damage the surface.

It is advisable to use a damp (not wet) cloth to remove fingerprints and marks, followed at once with a clean and dry soft cloth. Cooking splashes should be wiped up immediately using a damp cloth.
(Note: Broadoak Sanded and Eden Sanded are unfinished therefore care of these doors will depend on the type of finish applied, eg paint, stain, wax etc.)